Whether you’re shooting with an AR-15 or an SR-47 a bipod will help you shoot more accurately by giving you a stable base to shoot from no matter how uneven the terrain. Both weapons usually use rails to mount the bipod which means this is often the perfect opportunity to have a piece of equipment that will function for both weapons.
A common mistake when choosing a bipod is to go with either the most expensive or the cheapest end of the spectrum. This is a situation where you definitely get what you pay for and there is a huge difference in quality across that price range. That isn’t to say that some of the cheaper bipods aren’t good, it just means that they may not be as stable or may have cheaper features.
To choose the best AR Bipod you want something that is substantial enough to stand up to the recoil from your rifle but is still lightweight. The average AR-15 build, for example, is intended to be lightweight, so having a thunking great steel bipod weighing it down is rather pointless.
Similarly, if you want something that is able to hold a 30 round magazine you’ll need more than 6” in clearance. Some are also designed with shooting position in mind and are specifically for range or prone use and you’ll want to be mindful of that if you’re swapping from one to the other.
The Top 11 Best AR Bipod Reviews
Here are the top AR bipods that you can check in the market today.
This is honestly the cheapest bipod you’ll be able to get without it being a toy, and while it’s not the most impressive for something this cheap it is quite functional.
It deserves a mention on this list simply because it’s priced like a toy yet can honestly still be used.
The legs have a spring return with 5 settings, there’s a swivel and rail mount adapter and it’s made of hardened steel so it’s nice and solid.
- Quick release
It’s tough to get past just how cheap this is. The springs are tight and the metal construction is solid. You’ll also find some thoughtful additions like small lock washers on the mounting screw included to stop anything coming loose.
The legs snap solidly into place and are spring loaded so they extend quickly. You can set and lock the length of each leg individually too which makes it good for uneven terrain. It doesn’t add a lot of weight and it fits well with most rails.
As usual, no instructions included, but there are a few videos out there to show installation. At first the springs are so tight you’ll struggle to move them by hand, while this will loosen up it makes this a pain to use until that happens.
The other catch is that this is only designed to work with rail mounting systems, and while most people do use rails on an AR-15 it’s not going to work for everyone.
Atlas Bipod with ADM – $XXX.xx
So far we’ve looked at some pretty cheap bipods and the Atlas is definitely not one of those.
This is a solid piece of equipment that mounts via Picatinny rails and has an adjustable height of 4.75-9”.
It’s very solid and has tight tolerances which make it very sturdy when in use.
The Atlas definitely is an entirely different level of quality. Despite being
- Independently adjustable legs and Cant
- Picatinny Mount
- Metal Construction
Each leg moves independently which makes it much more flexible and allows you to stabilize on uneven terrain as well.
They can be positioned anywhere on a 180 degree arc and 5 different positions with a maximum cant of 30 degrees. It mounts directly onto Picatinny rails which means it’s much more stable than those that have swappable mounts.
The legs can be folded forwards or backwards and you can load it with the legs straight or at a 45 degree forward angle.
The PSR model may be preferably to some since it;s the newer model but it doesn’t have the rotating legs. There are also a high percentage of fakes for this model because of the cost and these have both poor construction and quality control.
In fact, most of the issues with this model come from people who have subsequently found out that their bipod was fake!
Tango Down ACB-4 Bipod – $XX.xx
Designed for heavier weapons this is a really sturdy bipod and it’s surprisingly light despite the solid aircraft grade aluminum construction.
There’s a lot of flexibility with this since you can adjust cant and traverse fully to deal with both uneven ground and target tracking.
This also has quick deployment that’s silent and the legs fold into a very low profile.
It’s designed specifically to be used with Picatinny rails but you can get an adapted for other mounts.
- Low Profile
- Cant and Traverse Adjustment
- Polymer construction for extreme temperature use
The folded legs are amazingly comfortable as they’re made of polymer which makes them less susceptible to extreme temperatures. It’s a well thought out design that is light and strong and is far better than Harris with the cant and traverse.
It stows easily under the rail and gives a low profile. The body has been treated to be corrosion-proof which is great for harsh environments. This is also produced in a variety of colors and finishes which is great for matching to a weapon.
The lower legs are somewhat stiff and this is also not a solid metal construction which means there’s a good change for the plastic to degrade and break after a while. The price has been prohibitive for many since it’s only just coming down enough to match the rest of the field.
One of the most simple to operate bipods this is still enough to get a good, solid base for accuracy.
The price is incredibly cheap with this in mind, and while it’s not height adjustable by much it does have limited panning capabilities.
The legs are foldable and rubberized as well as having a Posi feature. The locking wheel means that you’ll never have to worry about your adjustments slipping.
- Metal Construction
- Dual Mount
- Foldable and adjustable
- Swivel stud
This is a sturdy piece of equipment and when compared to the CVLIFE that seems almost flimsy in comparison.
The quick release button helps make the legs more functional for quick deployment and breakdown. The rails make it solid and sturdier than stud models too.
The swivel pan is limited, though with an AR-15 it’s substantially better than some other rifles. It often comes screwed down pretty tight so you’ll have to use some force to loosen it enough to get it to swivel.
The leg adjustments are also not in uniform sections so you can’t simply adjust inch by inch just through the 4 locking positions.
NcStar ABAB AR-15 Bipod – $XX.xx
Another bipod that’s really easy to operate this also has folding and extendable legs with rubberized feet.
Unlike the others however it has a swivel ball joint which allows for much more precise adjustments to height and cant than a simple pin swivel head.
The price is fair and it’s made of anodized aluminum so it’s light and strong. This is designed specifically for the AR-15 and you can tell.
The quick release and snap mount is not only convenient but also allows for flexibility when removing it at the touch of a button.
- One touch adjustments
- Independently adjustable legs
- ball head adjustments
The real star here is that ball head as it allows for such minute adjustments while staying very sturdy and without having to actually pick it up to adjust.
It weighs a full half pound less than some of the steel bipods thanks to the aluminum construction and each leg has it’s own retraction button so they can be adjusted independently for uneven ground.
The lug adjustment can be an issue depending on your upper. There’s only a small or large adjustment nut as standard which means your upper may not fit well with either depending on the type.
While you can machine it yourself if you haven’t got the capability you may be faced with a bipod that’s not usable unless you change your upper.
This is one of the better low-priced options and it has a lot of useful features like the ability to work from both a Picatinny or swivel mount.
It’s made of a combination of aluminum and steel for a super light yet sturdy design.
The springs have a lot of tension to them and adjustment using the Posi wheel is a lot easier than most levered bipods.
There’s a slight panning ability for minute adjustments and the stand is rubberized to protect your rifle and keep it in place.
- Slight panning
- Quick Retraction
Installation of this is quick and easy and it’s pretty compact so it doesn’t do much to the silhouette of your rifle.
The legs retract quickly and it’s tall enough to fit a 30 round mag. It’s a very sturdy bipod and the legs actually pop inward which helps.
There is enough of a slight rotation that you can adjust to your target but not enough to track which is perfect for getting your aim precise. The springs are a little stiff at first but they will loosen up with use.
While it is big enough to hold the 30 round mag having the legs extended to the maximum makes the center of gravity very small and it tips over easily.
The OP-1 is a common mistake here and that one is actually a few inches shorter but will still work for a 30 round magazine as long as you’re holding the butt up and not trying to rest it on the magazine.
Another durable choice that is lightweight and made of strong aluminum. The legs are also spring loaded and use a knob rather than lever to adjust.
It fits a Picatinny rail and has rubber feet for stability. The legs lock into place to keep it from tipping and it folds to a compact size.
There’s a quick removal clamp and it looks sleek since there’s no external springs.
- Independently adjustable legs
- Low cost
- Quick Removal Clamp
This is easy to install and adjust and it also has an additional mount to add a sling swivel. It’s got an impressive maximum height, you can fit a full 30 round magazine in.
It’s very lightweight and also comes with a lifetime warranty if anything goes wrong with it. The legs are not notched which means the impressive adjustment available can be done in any increment you want. Each leg can be deployed independently which is ideal for uneven ground.
While this will fit an AR it’s not the sturdiest of bipods and it certainly won’t stand up to anything more powerful. It’s certainly not the quality you can expect from Atlas or Harris.
There’s no cant adjustment either so you can’t tilt to the side (which is a bonus for stability but not good if you want more control). There are also no instructions and the process for adjusting is a little cumbersome and takes time making quick deployment impossible.
When it comes to precision shooting you’ll find that most marksmen prefer Harris. Whether it’s the 6-9” or the 7-12” these are the continued favorites for competition shooters.
This is the most popular among the elite and it has a lot of features including spring loaded notched legs, a swivel head for adjusting cant, and you can have the length customized to extend 7-12 by the company if you prefer.
Make sure you notice the difference in mode numbers between them as each letter signifies a different feature.
- Very customizable
- adjustable legs and swivel
- aluminum construction
One of the coolest things about the Harris is that it’s so customizable. LaRue also makes a customized swivel and Picatinny mount for it if you don’t like the standard swivel lever.
There are also spiked feet for soft ground available which can help adjust load and make it stand more consistently on a soft surface.
The swivel knob is a bit of a pain and it’s difficult to adjust without having tools to the point where you risk stripping it out on ordinary use or have the choice of having it not locked into place tightly enough to hold your rifle firmly.
This also means that there’s a slight rattle to it when it’s not clamped in tight.
Ohuhu Hunting Tactical Rifle Bipod – $XX.xx
This is similar in features to the CVLIFE and also has adjustable legs and rubber pads.
The difference with the Ohuhu is that it also has a steel mounting platform that is spring loaded to make it tougher and able to stand up to bigger recoil if you want to move it to a different weapon later.
This has a lower clearance however and only maxes out at the minimum height for the CVLIFE.
- Hardened Steel
- 2 mounts
This is a lot easier to use than most others even though its a similar design. This comes with two mounts included as well as hardened steel screws and springs which makes them much more durable.
The steel construction also gives a bit of weight to the bipod helping it be much more stable than alumium. The feet are also rubberized for better grip and it’s a nice compact size to offset the heavier steel. It’s also pretty cheap in comparison to other steel bipods and
The reason for the cheap price is that it only extends 3 inches, and while it will stabilize your rifle for those three inches it’s not as impressive as most of the other extending bipods.
The legs can be a bit finnicky and occasionally will get stuck which makes quick adjustment and fast deployment difficult. There are no instructions for this model either so you’ll need to refer to the YouTube videos for instructions and use.
A solid and dependable bipod that also has an impressive amount of movement and a quick detach mechanism.
There’s 25 degrees of cant to either side and it can adjust from 7-9.5” using simply thumb nuts.
This is military grade and ideal for extreme weather and terrain.
It’s aluminum, but still has significantly more heft to it than most of the other aluminum bipods because part of the construction is also steel.
- Total 50 degree cant
- Quick Detach
- Adjustable swivel and legs
It fits really nice and tight so you don’t have to worry about movement when collapsing or adjusting it. The deployed leg can also be used as a vertical grip and it deploys silently which is idea for tactical situations.
The Accu-Force lever system is very similar to that of the Atlas and it’s ergonomic as well as ideal for uneven terrain.
The quick detach isn’t always so quick and it can only be mounted to one rifle at a time because of this.
The height adjustment is also a problem as the wing nuts have to be tightened to the extreme or the bipod will start to cant with each shot and you’ll have to adjust with each shot.
CVLIFE 9-13 Inches Rifle Bipod – $XX.xx
Designed to last this has a lot of intelligent design built in including adjustable legs that are spring loaded and can fold.
This allows you to adjust your elevation quickly and accurately as well as making your weapon easier to carry.
The unique thing about this bipod is that it has no swivel top which prevents the rifle from tilting and keeps it stable.
It’s made from durable aluminum which is light and tough. It also comes with three adapters including a hand gun sling stud designed for the AR-15.
- 7lb Aluminum
- 3 adapters
- extendable legs
- rubber to prevent damage
The bipod has rubber pads over all the parts that will contact with your rifle to protect it from damage and keep it in place The extendable leg design helps to give you flexible accuracy while keeping your rifle firmly in place.
There’s the option to use the weaver mount, the sling stud or Picatinny rails to mount it. It comes in a smart anodized matte black finish and is actually a very close copy of the more expensive Harris Bipod so you’re saving some money too.
There’s no instructions which means you’ll spend a few minutes testing things out and figuring out how it all works, but there are several helpful YouTube videos on the subject.
While not having a swivel head does keep your rifle much steadier it also restricts you to not being able to turn without moving the whole set up which can give your position away.
Since it’s a “knockoff” version it’s also slightly lower quality and while it will do the job it’s perhaps not quite as good quality.
When it comes to choosing the best AR bipod you want something flexible enough to handle both the AR-15 and the AR-47 (if you have it). While most professional range shooters do prefer the Harris the NCStar undoubtedly has more flexibility based on having the ball head and the independently adjustable legs.
This is a clear winner just because of the ball-head feature since it allows so much control over your adjustments.